Page History

Cambridge Technology

• 6210H commonly used. Small and, hence, fast. Sizes of 3,5, and 6mm are commonly used.
• Typically controlled by a pair of 671xx servo driver or a dual-axis 673xx servo driver.
  • Most commonly, Class 1 controller topology (i.e., the servo incorporates one integrator) has been specified when ordering the servo driver board(s)

GSI Lumonics

• VM Series galvanometers combined with MiniSax 2 Analog Servo Controller should also work well.
  • No known/confirmed user to date

Any galvanometer with servo controller accepting an analog command waveform (in -10 to 10V range) should work with ScanImage