...
This section provides an up-to-date reference guide to the hardware that ScanImage supports and requires. This information reflects experience in the developers' laboratories, as well as the feedback from the user community.
If you use hardware not listed here with ScanImage (successfully!), please let us know!
Galvanometers PMTs and Associated Electronics
| Table of Contents |
|---|
| maxLevel | 4 |
|---|
| includePages | true |
|---|
| type | flat |
|---|
|
...
Galvanometers
| Panel |
|---|
- 6210H commonly used. Small and, hence, fast. Sizes of 3,5, and 6mm are commonly used.
- Typically controlled by a pair of 671xx servo driver or a dual-axis 673xx servo driver.
- Most commonly, Class 1 controller topology (i.e., the servo incorporates one integrator) has been specified when ordering the servo driver board(s)
Any galvanometer with servo controller accepting an analog command waveform (in -10 to 10V range) should work with ScanImage |
PMTs and Associated Electronics
...
