...
Make a shutter pulse (Width=100ms; Amp=5000 (note – this corresponds to 5 V); Delay=100) in a new Shutter pulse set and select it in the stimulator.
Running multiple programs simultaneously
Now select 'External' for the stimulator, acquirer, and ephys programs. All progrmas will now wait for an external trigger. Select Loop on the LoopGui to run three acquisitions. You should now hear the shutter opening as you cycle through the loop iterations.
The following should have happened:
The traces are displayed sequentially in the 2 acquisition windows
You should have heard the shutter opening (if applicable)
The traces are saved (as indicated by three new 'saved data' messages in the Matlab Command window)
02-Dec-2007 17:46:30 - Saved data to 'C:\Data\Gordon\cells\gs0001\gs0001AAAA0026.xsg'.
02-Dec-2007 17:46:33 - Saved data to 'C:\Data\Gordon\cells\gs0001\gs0001AAAA0027.xsg'.
02-Dec-2007 17:46:36 - Saved data to 'C:\Data\Gordon\cells\gs0001\gs0001AAAA0028.xsg'.
>>
In the XSG the acquisition number increments by three to ready itself for the next acquisition
Defining a hotswitch
Pull up the hotswitch and the hs_config programs. hs_config allows you to capature the configurations of individual programs to define a particular
...