...
- Motor operation reliability issues eliminated, or greatly reduced
- Image data collected with Snapshot would disappear
- Scans driven by ROI/LS/CT selections were incorrectly positioned
- Change to fill fraction during FOCUS was producing error
- Scan delay values were corrupted switching between bidirectional and sawtooth scanning
- Power was being set incorrectly at end of P/z stacks when Return Home After Acq/Repeat is disabled
- Pockels calibration now works in rejected-light case
- # Frames/File adjustment now accounts for # Z Slices and Average Frames settings correctly
- Zero XY and Zero Z operations no longer act like Zero XYZ
- Recent Zoom and other scan setting changes are now correctly honored at start of LOOP acquisitions
- TIF files where linesPerFrame is not a power-of-two are now correctly read by ImageJ
- Discontinuous slow-dimension scan command waveform fixed, for case where Flyback on final line is selected
- Hard error no longer occurs after some bad Pockels calibrations
- Fix support for Matlab 2009b, which was broken for case where exported clocks are used
- In User Functions dialog, edit operations could affect the wrong event, inadvertently
- Save selections in Channels... dialog were being ignored
- Crosshair was appearing doubled on ScanImage startup
- Override Lz was being applied even when start/end-points were not defined
- Error indicating insufficient buffering could occur when using slower imaging rates and with Disable Image Striping enabled
- scim_openTif(): error was occurring for cases when channels selected for saving are not contiguous
- Sporadic errors ocurring occurring during PMT Offset determination fixed
- Position was not correctly displayed at end of Zero XY/Z/XYZ operations; now motor position is read before setting zero
- Some header values were not saved correctly when Pockels cell feature was disabled
ScanImage 3.7.0 README (12-23-2010)
...