Page History

1. Put feet on bottom of main body using ¼-20 set screws.
2. Mark correct orientation of galvos. Remove the galvo mirrors from their mounts
3. Slide small galvo mirror through cap of galvo end. Secure mirror in place.
4. Attach the galvo mirror mount to the bottom of the main body (using 2x M2.5 screws)
5. Slide large galvo through main body and into mount. Fix in place.
6. Screw in end cap using knurled head captive panel screw and spring.
7. Secure fiber collimator using socket set screw. Make back end of fiber collimator flush with exterior of main body.
8. Mount the achromatic doublet in the SML05 lens tube; ensure orientation is correct.
9. Attach the lens tube to the DFM1B cube base piece.
   
   10. Attach DFM1B cube base pieces to the main body; ensure orientation is correct.

...