Electronic modules

Galvo driver box

sample holder that attaches to objective

Assembling primary dichroic cap

Putting in spring plungers and set screws

PMT assembly

The goal is to couple the lens onto the PMT face with oil

Seal the edge of the PMT face to the PMT housing with 5 min epoxy - careful not to soil the plate above the photocathode

Add 30 - 50 ul of high viscosity oil

Place condensor lens on oil. Make sure there are no bubbles and carefully remove overflow oil from the housing.

Place a thin ring of quick seal (WPI) on the PMT housing around the lens

Assemble alignment jigs

Alignment jig cage assembly

Imaging objective alignment jig mount

...