...
13) Adjust lateral position of roof prisms so that return beam is entering the prism, and rotate it so that the outbound beam 3 is hitting the retroreflector. Do fine angle adjustments of the prisms angle such that return beam 4 is level to table and colinear with track.
14) Mount output coupler. Place in bypass mode, and set target card after exit iris. Left bypass mode. Align exit beam to pass through iris and hit target by adjusting height of retroreflector so that beam passes through center of exit iris and move mirror to translate mirror, and use angle of mirror to make beam hit target on iris card.
15) Add two mirrors such that beam is level as it goes into the entrance of periscope.
Pockels cell
Shutter
2x table beam expander
...