...
Assemble the prism pair compressor
1) Glue prisms to flat post, TRT3 post with cutout. First glue the bottom prism, flush to bottom post, top prism 39.3 mm high (top face to bottom face)the top surface of the post cutout, and positioned at a right angle. Put a few drops of UV cure glue on post and place prism on top. Do this inside a V-block to ensure the angles are correct. Once the bottom prism has been glued down, glue to top prism at a distance of 39.3mm (between outside faces).
2) Glue mirrors to prisms. Hold post in vice at correct orientation, place UV cure glue on prism and glue down mirror. Rotate post to glue second mirror.
3) Glue mirror and prism
4) Glue two mirrors and prisms
25.3 mm from right side
2.5 mm from top
Making samples
Beads
Fluorescein
...