...
2) Glue mirror and prism to polaris mirror mount, making sure orientation is correct.
3) Attach KCP2 centering plate to polaris mount. Then glue prisms, to mount. Glue one to the mount directly, glue one to the side of the centering plate. Leave a space the approximate thickness of a washer (approximately 1 mm) between the two prisms, and a 1 mm gap between the back face of the prism and the mount. The side of the prisms are both aligned to each other.
4) Attach the TRT3 post of the top plate of the KB1X1 kinematic mount using a
4) Glue two mirrors and prisms
...