Model label: ResMirrChamberAssby
Assembly instructions
1) Screw in schneeberger slider from underneath, make sure to use the correct 10 mm long screws so as not to damage stage
2) Add the stop screw, spring plunger, and threaded bushing (remove the lock screw) and lock nut, knob, and screw for positioning the stage.
3) Glue in the CRS resonant mirror cable using a black RTV sealant (Dow-Corning 732 multipurpose sealant), leaving 7" outside of the chamber. Let the glue cure overnight. Alternatively the cable can be glued after the resonant mirror is mounted since the short cable is hard to manage inside the chamber.
4) (See below. Usage of the alignment jig in this way may not be necessary.) Create the alignment jig for the resonant mirror by UV curing a mirror to the resonant mirror alignment jig with norland 81. The mirror should be centered on the top of the alignment jig. This mirror will serve as a reference point for the orientation of the resonant mirror.
...