...
Following the instructions above may not result in the resonant mirror being aligned well enough. AlternateThis alternate alignment procedure should probably be followed instead. This procedure contains a more accurate method to check the alignment of the resonant mirror, which can be used in case the procedure above has already been followed, to check if the alternate procedure is necessary.
- Modify the resonant mirror chamber to conform to RevA. Use files J003086A.pdf and J003086A.stp. This adds features that will be necessary for aligning the resonant mirror while it is in place on the microscope. (The modification of the bottom holes to be used with flat head screws is less important than the addition of the two #8-32 holes.)
- Follow steps 1-3 above to mount items in the