SECTION 1: INITIAL MODULE
...
ASSMBLEY
These modules can be preassembled before mounting on the vertical breadboard. Assembly of the modules can be done in any order.
Assembling EnteranceBeamExpander_4x1
1) Mount the Thor_ACN254-050-B:1 lens in its lens tubes ensuring that its curved sides will point inwards when assembled.
...
2) Assemble the cage from thorlab parts including Thor_AC254-200-B-ML mounted lens. Set the lens cage plates approximately 141mm apart. The exact position of the plates will be set during microscope assembly
***INSERT PHOTO OF FINISHED ASSEMBLY***
Assembling the breadboard periscope
...
3) Assemble the voice coil base and mount voice coil
***INSERT PHOTO OF FINISHED ASSEMBLY***
Resonant mirror chamber
Put cable in with the epoxy
...
Assembling the lid with the o-ring and tightening
Fold mirror assembly
Cement fold mirror to mirror blank
...
Adjust mirror mount to proper thickness
...