• Created by Unknown User (sofroniewn), last modified on Aug 04, 2016

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Model label: BeamPeriscopeAssby_2AxisStages_SolidBase

Assembly instructions


1) Glue a right angle mirror MRA20-P01 to polaris mount using norland 81, making side flush to bottom of mount and front flush to top of mount

2) Glue a right angle mirror MRA20-P01 5.1 mm from edge with dial, and flush with the back of the stage.
3) Attach stages to the SolidPeriscopeBase, and attach the polaris mount to one of the stages in the correct orientation.
4) Remove redundant knob on polaris mount, as it should not be adjusted. This is the knob directly under the prism. It is still present in the photographs.
  • No labels