Model labels: RFObjAssby, 14163200 9-25_RFO_chunk

Assembly instructions

Mesoscopy > Remote focus objective assembly > RFO_assembly-01.png

1) The polarizing beam splitter (pbs) needs to be glued to the remote focus objective mount using UV optical adhesive (norland 81). The PBS needs to have the three sides marked by arrows facing the beam. The beam needs to be flush with the alignment edges on the mount. The UV transmission of the cube is low, so be sure to expose the glue to UV for ~ 2 minutes or so.

2) Mount the quarter wave plate on a rotation mount on a TR-01 post.

3) Mount the remote focus objective (using 2.5 mm captive screws - Mouser 761-m0277-ss)