FoldMirrorAssemb


  

1) Attach translation stage to the FoldMirrAssembBracket.
2) Attach McMassterCarr standoff to FoldMirrAssembBracket 
3) Attach gimbal mount to translation stage via adaptor plate.
4) Adjust thickness of gimbal mount to 29.7 mm. The knob in the bottom corner should no longer be adjusted. Mark it with a red X to ensure it doesn't accidentally get changed during the setting of the compensators. 
***INSERT PHOTO OF RED X on gimbal***
5) Cement the fold mirror centered to mirror blank (non-frosted side). Using norland 81. The mirror blank then fits inside the mount on the gimbal.
***Describe gluing procedure ***
***INSERT PHOTO OF FINISHED ASSEMBLY***