Starting EPHUS - Anatomy of a Startup File

Background

To start EPHUS, one must invoke a startup file at the MATLAB command line. The file is a MATLAB function file (i.e., .m extension), located in the current directory or somewhere on the user's MATLAB path. Every user/rig requires a customized startup file.

The best way to create this file is to modify one of the supplied example files, which are constantly maintained on this site. Startup files contain both configuration and application information. The vast majority of users only need to adjust the configuration information, which resides in clearly demarcated sections of the startup file.

This guide steps through a typical startup file, which follows the most current conventions. For completeness, both the configuration and application sections are described. Only power-users, however, should modify the application sections, and limited support can be provided for such uses.

The 'Specimen'

The Ventral View (Configuration)

The Head

Here's the beginning of our startup file 'specimen':

function gephus

%% STARTUP BOILERPLATE 
%Set up a wait bar to show the progress.
wb = waitbarWithCancel(0, 'Starting ephus...', 'Name', 'Loading software...');
pos = get(wb, 'Position');
pos(2) = pos(2) - pos(4);
set(wb, 'Position', pos);

This section contains the function declaration, with the name of the startup file – in this case, 'gephus'.

The next section (%%Startup Boilerplate) should not be modified, as the name implies. This section contains the code that is common to all startup files.

The double-parenthesis(%%) signifies a MATLAB M-file cell. They are used throughout the startup file to help clearly demarcate the different file sections, when viewed in the MATLAB editor.

Device/Channel Configuration

This section contains the configuration information for each of the devices & channels connected to this installation of EPHUS:

%% DEVICE/CHANNEL CONFIGURATION

%Amplifier objects for ephys
patch{1} = multi_clamp('text_file_location', 'C:\MATLAB6p1\work\Physiology\MClamp700BChannel1.txt', 'scaledOutputBoardID', 1, 'scaledOutputChannelID', 0, ...
    'vComBoardID', 1, 'vComChannelID', 0, 'channel', 1, 'name', '700B-1');

patch{2} = multi_clamp('text_file_location', 'C:\MATLAB6p1\work\Physiology\MClamp700BChannel2.txt', 'scaledOutputBoardID', 1, 'scaledOutputChannelID', 4, ...
    'vComBoardID', 1, 'vComChannelID', 1, 'channel', 2, 'name', '700B-2');

%Acquirer channels 
acqChannelNames = {'photodiode1'};
acqBoardIDs =   [2];
acqChanIDs =    [0];

%Stimulator channels 
stimChannelNames = {'pockelsCell' 'shutter0' 'xMirror' 'yMirror' 'shutter1' 'ao5' 'ao6' 'ao7'};
stimBoardIDs = [3 3 3 3 3 3 3 3];
stimChanIDs =  [0 1 2 3 4 5 6 7];

EPHUS programs sometimes employ specialized devices, which are implemented as MATLAB objects. In this case, for instance, the ephys program employs amplifier objects. All objects require a constructor in order to be created – this is a function which must be called and typically consists of several arguments initializing the particular object's properties. In EPHUS, all devices must be 'constructed' upon startup, and presumed to exist 'forever' (until EPHUS is closed).

In this case, the multi_clamp function calls create a particular type of amplifier – this refers to the MultiClamp 700B patch-clamp amplifier from Axon Instruments. The multi_clamp object definition is a 'class' (or, technically, a 'subclass') of amplifier. Another amplifier class that could be (but isn't) constructed here, is an axopatch200B, referring to the Axopatch 200B instrument, also from Axon Instruments.

The Device Constructors page documents the syntax for the various devices presently supported by EPHUS, such as the MultiClamp 700B and Axopatch 200B.

In addition to devices, EPHUS contains two programs – acquirer and stimulator – which are included in virtually every EPHUS deployment. These programs allow a number of National Instruments A/D, D/A, and buffered digital output channels to be user-defined and controlled. As with devices, the channels must be configured on EPHUS startup, and persist until EPHUS is closed (it is presumed that users are not re-connecting signals during an experiment!).

For A/D channels, handled by the acquirer, three variables must be entered: acqChannelNames, acqBoardIDs, acqChanIDs. The variable acqChannelNames is a MATLAB cell array, while acqBoardIDs and acqChanIDs are numeric arrays of integers. Each of the arrays is a 'row vector' of the same length.

• acqChannelNames: A cell array of strings specifying descriptive names for each of the A/D channels.
• acqBoardIDs: An array of integers specifying the numeric indices of the National Instruments (NI) boards associated with each of the named channels in acqChannelNames. The Board IDs are defined in the NI Measurement and Automation Explorer program included with the DAQmx driver. The NI convention is that boards are named 'Dev#', i.e. 'Dev1', 'Dev2', etc. EPHUS presumes this convention is followed, and the BoardID refers to the number following 'Dev'.
• acqChanIDs: An array of integers specifying the A/D channel indices corresponding to each of the named channels in acqChannelNames. Different boards have differing numbers of supported A/D indices. Channel indices for NI begin with 0.

The D/A channels are specified to initialize the stimulator in a similar fashion, with the variables stimChannelNames, stimBoardIDs, and stimChanIDs.

Configuration Variables

The next section contains configuration variables that can/should be modified by the user. In our sample file, we see:

%% CONFIGURATION VARIABLES
triggerOrigin = '/dev1/port0/line0'; %Specifies the digital line terminal on which the trigger pulse is output at the start of each acquisition
triggerDest = 'PFI0'; %Specifies the digital line terminal on which the trigger pulse is received. On /every/ board, this must be connected to the triggerOriginal terminal

xsgStartDirectory = 'C:\Data\'; %Default directory in which to save data files

pockelsOn=1; %Logical value specifying whether Pockels Cell is in fact attached/active on 

%Size, in microns, of the camera FOV (a camera application is required by the mapper program)
xVideoScaleFactor =  2625;
yVideoScaleFactor = 1980;

%% *************************END OF CONFIGURATION***************************************

The number and names of the configuration variables in a startup file will depend on the particular application (as determined by the application sections below). Generally, they should be well-documented via MATLAB comments as seen here.

Some variables appear in virtually all EPHUS deployments. For instance, triggerOrigin and triggerDest are used in all cases to specify, respectively, the digital line on which the trigger pulse for each acquisition is output and the terminal on which each board expects to receive this trigger signal, ensuring all boards begin acquisition at the same moment.

The end of this section is marked as the 'END OF CONFIGURATION'. That's all that most users need to stomach.

The Dorsal View (Application)

For those with a strong stomach, let's look at the 'other side' of the startup file – the application sections.

The application sections are only intended for modification by developers and power-users. This documentation is provided for informational purposes only.

The application sections of the startup file are less bound to convention, and hence are more likely to be not completely/correctly described by this documentation.

Timing/Clock Setup

This section initializes daqjob objects used by the various programs and handles the configuration of trigger and clock functions on the DAQ boards. This section makes use of daqjob, and in some cases nimex, class method calls.

For this file, we can see that the only task required is to configure the start trigger input and output lines:

%% TIMING/CLOCK SETUP 
%Set up the triggering.   
acqJob = daqjob('acquisition');
scopeJob = daqjob('scope');
setTriggerOrigin(acqJob, triggerOrigin);
setTriggerOrigin(scopeJob, triggerOrigin);
setTriggerDestination(acqJob, triggerDest);
setTriggerDestination(scopeJob, triggerDest);

Program Startup

This section starts each of the EPHUS programs needed for this particular application. In addition, the programs are sometimes configured further following their initialization.

Here, we can see the programs which are opened by this startup file:

%% PROGRAM STARTUP 
if waitbarUpdate(0.0, wb, 'Starting experimentSavingGui...'); return; end
xsg = openprogram(progmanager,{'xsg', 'experimentSavingGui'});
setLocalBatch(progmanager, xsg, 'directory',xsgStartDirectory);

if waitbarUpdate(0.1, wb, 'Starting ephys...'); return; end
ep = openprogram(progmanager,'ephys',patch);

if waitbarUpdate(0.16, wb,  'Starting ephysScopeAccessory...'); return; end
openprogram(progmanager,'ephysScopeAccessory',patch);

if waitbarUpdate(0.24, wb,  'Starting stimulator...'); return; end
stim = openprogram(progmanager, 'stimulator');
stim_addChannels(stim,stimChannelNames,stimBoardIDs,stimChanIDs);

if waitbarUpdate(0.32, wb, 'Starting acquirer...');return;end
acq = openprogram(progmanager,'acquirer');
acq_addChannels(acq,acqChannelNames,acqBoardIDs,acqChanIDs);

if waitbarUpdate(0.48, wb, 'Starting pulseJacker...');return;end
openprogram(progmanager, 'pulseJacker',{ep,stim});

if waitbarUpdate(0.52, wb, 'Starting userFcns...');return;end
openprogram(progmanager, 'userFcns');

if waitbarUpdate(0.56, wb, 'Starting autonotes...');return;end
openprogram(progmanager, 'autonotes');

if waitbarUpdate(0.60, wb, 'Starting headerGui...');return;end
openprogram(progmanager, 'headerGUI');

if waitbarUpdate(0.64, wb, 'Starting HotSwitch...');return;end
openprogram(progmanager,{'hotswitch', 'hotswitch', 'hotswitch', 'hs_config', 'hs_config'});

if waitbarUpdate(.68, wb, 'Starting photodiode configuration...');return;end
    pdiodeConfig = openprogram(progmanager, {'photodiode' 'photodiodeConfiguration'},'photodiode1');
end

if waitbarUpdate(0.76, wb, 'Starting mapper...');return;end
if pockelsOn
    mapper = openprogram(progmanager, 'mapper','xMirror','yMirror','pockelsCell','shutter0',pdiodeConfig);
else %Don't associate either Pockels or Photodiode channel with mapper, if Pockels is not used
    mapper = openprogram(progmanager, 'mapper','xMirror','yMirror','','shutter0');
end    
setLocalBatch(progmanager, mapper, 'xVideoScaleFactor', xVideoScaleFactor, 'yVideoScaleFactor', xVideoScaleFactor);

'Constructing' programs with openprogram()

Each of the programs is opened by invoking openprogram(), which is a method of the Program Manager (@progmanager) class that is central to EPHUS.

The syntax for openprogram is:

Let's step through the arguments:

• hProg: An instance of a program object, which can be treated as a 'handle' to the program.
• progmanager: The (singleton) @progmanager object, which can be obtained by simply calling 'progmanager'
• programName: For typical programs, this argument is used, specifying the name of the program to start. The program names are those in the <EPHUS>\Programs directory of the installation. The program's figure will have the same title as the name.
• programInfo: A cell array can be supplied instead of a simple string. This can be used for two purposes.
  1. A two-element cell array can be used to display the program GUI with a different title than the program name. Note that the alias 'xsg' is supplied before the actual program in the array.
  2. For programs which contain multiple GUIs (noted as such in EPHUS Programs), the cell array programInfo option must be used. For legacy reasons, both the first and second elements should be the program's alias, while the third element should be the actual program name (i.e. the M-file in <EPHUS>\Programs). Thereafter, elements are added in pairs; the first is the sub-gui's alias and the second is the sub-gui's actual name (an M filename found in the same directory as the main program M file).

• constructorArg#: Many programs have required (and/or optional) arguments that must be (or are typically) supplied upon invoking the program. These can be considered the constructor arguments of the program (the programs can be considered as class definitions, though they're technically not). The required arguments for each program are documented in EPHUS Programs.

For our current example, most calls to openprogram() employ the simple programName argument, but the programInfo cell array argument is employed for the experimentSavingGUI and the hotswitch programs. For the experimentSavingGui, the alias 'xsg' is specified for the program. For the hotswitch program, the main GUI/program as well as its reqired sub-gui, 'hs_config', is launched. In this case, both the main and sub-GUI use the same title as their corresponding M files – hence the names are repeated in the cell array.

Several programs in our example require 'constructor' arguments. One example is the mapper. As documented in EPHUS Programs, the mapper requires that the names of channels be provided corresponding to the X Mirror, Y Mirror, Pockels Cell, and shutter signals that it controls. These channels must have been designated for addition to the stimulator in the Channel/Device Configuration section. The Pockels Cell control can be deactivated by entering a blank channel name. The mapper constructor also takes an optional argument, which must be a program 'handle' for an instance of the photodiodeConfiguration program. That program itself is associated with an acquirer channel for the photodiode signal.

The 'constructor' for every program is the genericStartFcn() function that is contained within every program's main M file (i.e. the file with the name as the program).

Setting program properties

The 'constructor' arguments provide the necessary or highly typical information used to initialize a program in a manner consistent with the configuration information supplied in the startup file. Occasionally, it may be useful to configure additional properties of the program upon startup. This can be accomplished via the setLocal() and setLocalBatch() methods of the Program Manager. The syntax for the latter is:

As with openprogram(), the function progmanager should simply be supplied for the first argument. Subsequent arguments are property/value pairs. The names of properties for given programs can be found by inspecting the makeGlobalCellArray() function found within each program's main M file. The valid property type(s) (i.e. numeric, string, etc) can also be determined from this function, and should be adhered to. The setLocal() function functions identically to the setLocalBatch() function, but only allows one property/value pair to be specified.

Most of the configurable properties of programs can be set via the program's GUI and then stored by saving the program's configuration. Thus, few properties are set via the startup file. Nonetheless, the ability to set program properties textually via the startup file is an important facility that, for instance, allows new features to be added to programs which can be accessed prior to (or in lieu of) making any GUI modifications.

In our example, the

Adding and removing programs

UserFcn Bindings

The Tail

Final Comments

Like Labview
Version-to-version