Overview
ScanImage 5 will be released in two parts, SI5-Resonant and SI5-Flex.
| Early-Access Release(s) | Release | Comments | |
|---|---|---|---|
| SI5-Resonant | May 2014 | SFN 2014 |
|
| SI5-Flex | SFN 2014 & | SFN 2015 |
|
Early-access releases will be available to ScanImage 5 founding members.
ScanImage 5 will have customization layers for both CPU and FPGA-based processing (latter for resonant scanned imaging only) which can be used to implement online or real-time analysis, including closed-loop experiments with parallel imaging and (photo)stimulus.
SI5-Resonant Hardware
For resonant scanned raster imaging, both digitizer hardware and scanner hardware are required.
Digitizer Hardware
ScanImage 5 Resonant will use National Instruments PXI FlexRIO platform.
The system consists of three components: PXI chassis, FPGA Module, and digitizer module.
The NI system bundles with SI5 support include:
| Component Type | SI5 Supported Parts | Comments |
| PXI Chassis | PXIe-1073 chassis |
|
|---|---|---|
| FPGA Module |
|
|
| Digitizer Module | NI 5732 (2 Chans/80MHz) NI 5734 (4 Chans/120MHz) |
- National Instruments can include extended warranty support for the hardware bundles, You will be given the option when placing the order. Please discuss with your local sales rep if you have questions.
- ScanImage 5 will include pre-complied FPGA bitfiles - one for each of the FPGA/Digitizer combinations above. Whitepaper on how to download bitfiles to FPGA hardware.
Scanner Hardware
Sutter Components
Sutter Instrument company offers a Resonant Scan Box component combining the required components in a sound-proof housing.
Both the Sutter standalone Resonant Scan Box and their full MOM-Resonant microscope system will be compatible with ScanImage 5.
New & Old CRS Scanner Models
ScanImage 5 supports the CRS Resonant Scanner system from Cambridge Technology.
Recently, Cambridge is offering a new CRS Resonant Scanner Driver board (part 6SC08KA012-02Y with new 711-80159 driver board).
The new systems provide improved synchronization and are optimized for use with the maximal angle versions of the scanner devices.
Vidrio engineers will test this new scanner system before April 1, 2014. Prospective ScanImage 5 users may elect to wait until this assessment before purchasing a scanner system.
Note that 'classic' CRS scanner systems will also be fully supported, though minor additional electronics might be needed.
For resonant scanned raster imaging, users require 1x each of:
Resonant Scanner: Cambridge Technologies CRS-8 or CRS-12 scanner (older or newer systems. Includes control board.
Galvo Scanner: Cambridge Technologies 6210 or 6215 galvo system (typ. with 4-6mm mirror), with servo control board. Other analog-control galvos also supported.
Notes
CRS-12 support will not be ready by the SI5-Resonant prerelease date; its support is planned by SFN 2014
Galvo system's max slew rate can impact the frame rate achievable at larger fields-of-view. Slower slew rates require a larger number of resonant scanner line periods for galvo flyback.
SI5-Flex Galvo Scanning Hardware
For SI5-Flex galvo scanning modes (raster and future scan modes):
Digitizer Hardware
SI5-Flex will support the following input digitizer options:
| Family | Model Number(s) | Comments |
|---|---|---|
| PCIe X Series | PCIe-6351, PCIe-6353 | PCIe-6351/6353 recommended for no-Pockels/Pockels cases, respectively |
| PXIe X Series | PXIe-6356, PXIe-6358 | PXIe boards fit into chassis used for resonant scanning (if applicable). PXIe-6356/6358 recommended for no-Pockels/Pockels cases, respectively. |
| S Series | PCI-6110 | Not recommended for new systems, but will remain supported. A PCI slot and full-size computer case is required to house this board. |
Scanner Hardware
An X/Y analog-controlled galvo scanner pair is required. Cambridge Technologies 6210 or 6215 galvo system (typ. with 3-6mm mirrors) is typical. Galvo system characteristics impact attainable line speed and performance of future scan modes.
Computer Hardware
ScanImage 5 (resonant and galvo modules) is expected to run on standard multi-core machines (e.g. iCore7) with at least 4GB RAM and at least 4 PCIe slots.
Example tested ScanImage 5 computer systems will be provided at the prerelease date.