• Created by Unknown User (sofroniewn), last modified on Aug 02, 2016

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Model label: EntranceQtrWavePlateAssby

Assembly instructions

 

 

 

 

 

PMT assembly
The goal is to couple the lens onto the PMT face with oil
Seal the edge of the PMT face to the PMT housing with 5 min epoxy - careful not to soil the plate above the photocathode 
Add 30 - 50 ul of high viscosity oil
Place condensor lens on oil. Make sure there are no bubbles and carefully remove overflow oil from the housing.
Place a thin ring of quick seal (WPI) on the PMT housing around the lens
  • No labels