...
Imaging objective tray
Imaging objective
Primary dichroic cap
Big detection lens and accessory optics dichroic holder
...
Detection channel assembly
Accessory optical modules
...
Electronic modules
Galvo driver box
Alignment / calibration modules
sample holder that attaches to objective
Assembling primary dichroic cap
Putting in spring plungers and set screws
PMT assembly
The goal is to couple the lens onto the PMT face with oil
Seal the edge of the PMT face to the PMT housing with 5 min epoxy - careful not to soil the plate above the photocathode
Add 30 - 50 ul of high viscosity oil
Place condensor lens on oil. Make sure there are no bubbles and carefully remove overflow oil from the housing.
Place a thin ring of quick seal (WPI) on the PMT housing around the lens
Assemble alignment jigs
Alignment jig cage assembly
Imaging objective alignment jig mountAssembling the covers
Assembling objetive mounted optic holder
...