Versions Compared

Old Version 6

changes.mady.by.user Karel Svoboda

Saved on

compared with

New Version Current

changes.mady.by.user Unknown User (sofroniewn)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Model labels: RFObjAssby, 14163200 9-25_RFO_chunk

Assembly instructions

 

 

 

 

Remote focus objective assembly

Image Added

1) The polarizing beam splitter (pbs) needs to be glued to the remote focus objective mount using UV optical adhesive The (norland 81). The PBS needs to have the three sides marked by arrows facing the beam.The  The beam needs to be flush with the alignment edges on the mountThe . The UV transmission of the cube is low, so be sure to expose the glue to UV for ~ 2 minutes or so so.
2) Mount Mount the quarter wave plate as shown in the model.on a rotation mount on a TR-01 post.
3) Mount the remote focus objective (using 2.5 mm captive screws - Mouser 761-m0277-ss)
Image RemovedImage Removed
Left, remote focus objective mount, quarter waveplate holder, quarter waveplate, and polarizing beamsplitter. Right, components mounted on remote focus mount, including remote focus objective.