User Settings (r3.7)

USER SETTINGS Dialog

• Unknown macro: {blue}
  Some users may prefer to separate ('chunk') data from very long acquisitions into several smaller files. This value specifies the number of Frames to log to each file during the acquisition. As further data is collected, a new data file is automatically created.
  To disable such 'chunking', this value should be set to 'inf' (infinity), causing all data to be logged to a single file.
  When chunking is enabled, a three-digit number (e.g. 001, 002, etc) is appended to the filename, following an underscore. The number is auto-incremented as each new file ('chunk') is added. For example, if 3000 frames are collected with 500 frames/file, with
  Unknown macro: {blue}
  ='BehaviorExpt' and
  Unknown macro: {blue}
  =1, specified in the
  Unknown macro: {report-info}
  panel, there will be six files named 'BehaviorExpt1_001' through 'BehaviorExpt1_006.

• Unknown macro: {blue}
  This option causes the actual power level to be measured using the photodiode (or other power detector), as configured in the INI File for each Beam, following any change to the ScanImage Configuration. The measured value is referenced to the current Pockels Calibration for each Beam, and the
  Unknown macro: {blue}
  level value is updated to match the measured level.
  A change in the user-specified
  Unknown macro: {blue}
  level is a change to the Configuration, so a measurement will occur.